SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> spark plug socket question /cgi-bin/YaBB.pl?num=1284359337 Message started by Tiefighterpilot on 09/12/10 at 23:28:57 |
Title: spark plug socket question Post by Tiefighterpilot on 09/12/10 at 23:28:57 do i need a socket made for spark plug (with magnet)? or can i use a regular socket (deep well)? thanks. |
Title: Re: spark plug socket question Post by Reelthing on 09/12/10 at 23:35:18 deep thin wall works fine - pretty tough to get to with the tank on unless you've either taken off the chrome head cover or made youself the swing out cover |
Title: Re: spark plug socket question Post by justin_o_guy2 on 09/13/10 at 00:38:50 Ifyouhave a problem lifting the plug out after its unscrewed, you can use a spark plug boot, ripped off an old plug wire, ( thats what I use to start them back in, along with some neversieze) or shove the plug wire on it & lift it up. Make sure you blow all the dirt out of that hole before pulling the plug. |
Title: Re: spark plug socket question Post by ls650v on 09/13/10 at 03:06:08 And if you don't have an old spark plug boot laying around, a piece of tight fitting fuel line also works. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |