SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Diameter of the shock mounting holes?
/cgi-bin/YaBB.pl?num=1284181530

Message started by 8696Savage on 09/10/10 at 22:05:30

Title: Diameter of the shock mounting holes?
Post by 8696Savage on 09/10/10 at 22:05:30

Does anyone know the diameter of the mounting holes (eyes) on the actual shocks, top & bottom for 1996?

Not the bushing hole size, but the actual eye holes on the shocks.

Thanks!

Title: Re: Diameter of the shock mounting holes?
Post by 8696Savage on 09/11/10 at 20:43:09

I found one. They are 1" top and bottom. :P

Title: Re: Diameter of the shock mounting holes?
Post by Reelthing on 09/11/10 at 21:22:07

Not sure your question - I mean the stock shocks have a rubber insert with a bushing in the rubber - the hole is .5625 inch or so - are you wanting the measurement of the inside hole of the rubber or with the rubber knocked out?

Title: Re: Diameter of the shock mounting holes?
Post by 8696Savage on 09/12/10 at 01:41:30

Thanks for your reply. I was able to find one and measure it. With the bushing out it measures 1". The hole in the bushing was like you said. 5/8"