SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Rear turn signal mounting
/cgi-bin/YaBB.pl?num=1283812005

Message started by Joe C on 09/06/10 at 15:26:44

Title: Rear turn signal mounting
Post by Joe C on 09/06/10 at 15:26:44

OK, Im know pretty much nothing about electrical and I need to figure out an easy/cheap way to mount up my rear turn signals. I'd like to use the existing holes on the fender(see pic) to mount up the signals but I don't have to use the holes. Im looking for something small that will wire up directly to the existing wires. Can you guys help me out? Thanks
http://farm5.static.flickr.com/4128/4965625384_64e2b345bd_z.jpg
Sorry for this crappy pic.

Title: Re: Rear turn signal mounting
Post by jef.savage on 09/06/10 at 15:48:44

Virtually all the after market signals out there will wire to the existing wires and most will fit those holes. Do some browsing on Ebay and bike stores and see what you like.

Title: Re: Rear turn signal mounting
Post by Joe C on 09/06/10 at 21:17:33

If I buy a LED signal do I need some type of load equalizer?

Title: Re: Rear turn signal mounting
Post by 12Bravo on 09/07/10 at 05:46:32

657375627F79782E7C7973160 wrote:

If I buy a LED signal do I need some type of load equalizer?

Yes or you can get a an electronic flasher relay designed for use with LED lights. The electronic relay will save a little on the charging system.