SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Cone Air Filter Size? /cgi-bin/YaBB.pl?num=1283392337 Message started by jrm8486 on 09/01/10 at 18:52:16 |
Title: Cone Air Filter Size? Post by jrm8486 on 09/01/10 at 18:52:16 Did a search and can't find a size of the one that will fit,looking for size in MM. any ideas? I fugure if I have to re jet might as well go all the way.Thanks! |
Title: Re: Cone Air Filter Size? Post by spacepirates on 09/01/10 at 20:23:13 i think the carb opening is something around 58mm, but i think i bought a 60mm cone filter that works just fine. it fits real loose, but once you tighten it up with a hose clamp (which you do anyways) it sits on there real nice like. ... but don't take my word for it. take a ruler out there and measure the opening, anything within a few milimeters should work just fine. |
Title: Re: Cone Air Filter Size? Post by dasch on 09/02/10 at 01:03:36 My KN is 60mm and it fit great. |
Title: Re: Cone Air Filter Size? Post by jrm8486 on 09/02/10 at 05:02:13 Thanks guys! |
Title: Re: Cone Air Filter Size? Post by LANCER on 09/02/10 at 05:11:23 have a K&N on the shelf just a mm or 2 smaller than the carb (57mm OD) and fits nice and snug small enough to just clear the batter cover if interested PM me for a good deal |
Title: Re: Cone Air Filter Size? Post by MotoBuddha on 12/05/10 at 08:15:44 I just measured the carb with my calipers. It's almost exactly 57mm. Here's a 57mm pod on eBay: http://cgi.ebay.com/ebaymotors/57mm-2-25-Inlet-K-N-Cone-Universal-Air-Filter-R-1260-/150461396195?pt=Motors_Car_Truck_Parts_Accessories&hash=item230832b4e3#ht_2157wt_941 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |