|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> I'm strippin' my nuts... /cgi-bin/YaBB.pl?num=1282589366 Message started by Serowbot on 08/23/10 at 11:49:26 |
|
Title: I'm strippin' my nuts... Post by Serowbot on 08/23/10 at 11:49:26 :-?... The two nuts that bolt the rear of the solo seat down... Tryin' to come up with a quick-detach alternative... I'm currently messin' with hairpin type clips, but they are a little frustrating to insert and want to pop out... (bending the tip straight and inserting into the nut...) Any other ideas?... http://i600.photobucket.com/albums/tt82/serowbot/hitchpinsandclips.jpg?t=1282589147 |
|
Title: Re: I'm strippin' my nuts... Post by prechermike on 08/23/10 at 12:10:59 Serowbot Here is what I did, I think it works great, no problems at all. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1243333783/14#14 |
|
Title: Re: I'm strippin' my nuts... Post by Hashbrown on 08/23/10 at 12:16:02 yeah i did this with my VTX1800. look up marine detent pins with a similar diameter as your bolts for the seat pan. you want to drill out the threads on the elbow brackets on the seat so the pin slides in. it has a locking ball detent that will allow it to seat and lock securly. works perfectly for me. |
|
Title: Re: I'm strippin' my nuts... Post by daedalus on 08/23/10 at 12:32:24 Ball detent pins work great for me too. I used them when I swapped out my seat and transferred the hardware over. |
|
Title: Re: I'm strippin' my nuts... Post by Serowbot on 08/23/10 at 12:32:35 606275737875627D797B75100 wrote:
Perfect,... Thanks Preach... ;)... |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |