SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Engine/Transmission weight /cgi-bin/YaBB.pl?num=1280969010 Message started by VanHanlon on 08/04/10 at 17:43:30 |
Title: Engine/Transmission weight Post by VanHanlon on 08/04/10 at 17:43:30 Anybody know how much the engine/transmission unit weighs on the S40? Thanks, Jonathan |
Title: Re: Engine/Transmission weight Post by verslagen1 on 08/04/10 at 17:56:27 close to 100 lbs dry. less head and cyl, starter and carb. |
Title: Re: Engine/Transmission weight Post by serenity3743 on 08/06/10 at 05:20:28 Real heavy! |
Title: Re: Engine/Transmission weight Post by T Mack 1 - FSO on 08/06/10 at 19:24:56 110710070C0B161B51555651620 wrote:
Agree, very hard to lift into the bike by one's self..... Trust me. but......the best way is to get an old blanket or comforter, drain the fluids, then lay the bike down on it. Unbolt the engine, then lift the frame off the engine. To reinstall, do it in reverse. |
Title: Re: Engine/Transmission weight Post by verslagen1 on 08/06/10 at 19:43:53 453C5C70727A20110 wrote:
Agree, very hard to lift into the bike by one's self..... Trust me. but......the best way is to get an old blanket or comforter, drain the fluids, then lay the bike down on it. Unbolt the engine, then lift the frame off the engine. To reinstall, do it in reverse.[/quote] That's the way I do it. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |