SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> looking at drag pipe
/cgi-bin/YaBB.pl?num=1280039005

Message started by RTC on 07/24/10 at 23:23:25

Title: looking at drag pipe
Post by RTC on 07/24/10 at 23:23:25

I am looking to put a drag pipe or something similar on my bike. I have a dyna right now but i dont like the look. i want a slight baffle in it as well.

i was looking at the blue collar bobber kit but it seems a little expensive. should i try and get one fabbed up at an exhaust shop or what?

Title: Re: looking at drag pipe
Post by justin_o_guy2 on 07/24/10 at 23:48:24

Pop that Dyna off & send it to the guy who is trying to decide what exhaust to run. ???

Title: Re: looking at drag pipe
Post by RTC on 07/24/10 at 23:54:07

not sure where you're going with that.....nothing is better than the dyna?

Title: Re: looking at drag pipe
Post by RTC on 07/25/10 at 00:00:22

i have a different dyna than anyone i've seen and i am not totally in love with it also it's not the bobber look i am going for in the long run.
http://p1.bikepics.com/pics/2010%5C04%5C24%5Cbikepics-1959586-800.jpg

Title: Re: looking at drag pipe
Post by justin_o_guy2 on 07/25/10 at 03:12:49

Not the design I call a Dyna. Maybe Ive had the wrong idea, IDK.

Title: Re: looking at drag pipe
Post by LANCER on 07/25/10 at 03:13:43

switch from dyna to drag pipe ......

noise lever increases

performance level decreases

Title: Re: looking at drag pipe
Post by justin_o_guy2 on 07/25/10 at 03:29:37

Lancer, is that a Dyna? I thot the Dyna was tapered on the tail end.

Title: Re: looking at drag pipe
Post by RTC on 07/25/10 at 08:38:42

i got it from a harley dealer pick-a-part and the label on it said dyna

Title: Re: looking at drag pipe
Post by james may on 07/25/10 at 09:44:07

I don't think that most muffler shops would fab up any kinda drag pipe accept a straight through pipe. you might as well just go buy the correct diameter length of pipe from an auto parts store maybe 20$. The BCB I don't think is a bad deal it's got baffles in it and it comes with the gasket and wrap if you wanted to wrap your exhaust. So a straight through drag pipe would probably cost you about 45$ with wrap and to do baffles you'd have to custom build one. Otherwise your going to sound like an evil lawnmower going down the street.

here's a no baffle ebay drag pipe for 35$ shipped..

http://cgi.ebay.com/ebaymotors/SUZUKI-BOULEVARD-S40-CUSTOM-MUFFLER-DRAG-PIPE-KIT-SALE-_W0QQcmdZViewItemQQhashZitem23083c2d80QQitemZ150462016896QQptZMotorcyclesQ5fPartsQ5fAccessories

if you have a welder or someone with a welder who is willing to put a couple of baffles in your straight pipe that works too, but like I said that's not something I think muffler shops usually do. I could probably do it for ya for 75 if ya can't find anyone around you to do it.

you can also build your own glass pack muffler, but if you want it to look like a drag pipe it'd probably be pretty restrictive. (1 3/4 dia outside pipe with an inside pipe multiple drill holes in about 1 dia and fiberglass and steel wool in the space between the pipes to absorb some sound.)