SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> pulling the rear turn signals /cgi-bin/YaBB.pl?num=1279823669 Message started by Hashbrown on 07/22/10 at 11:34:28 |
Title: pulling the rear turn signals Post by Hashbrown on 07/22/10 at 11:34:28 does anyone know a way to pull the rear turn signals without taking the rear fender off, if so how? Thanks all |
Title: Re: pulling the rear turn signals Post by verslagen1 on 07/22/10 at 11:35:54 you have to pull the rails not the fender. |
Title: Re: pulling the rear turn signals Post by Hashbrown on 07/22/10 at 11:41:53 is that just the bolts under the rear side of the rails? i found one set towards the back and the two near the seat...any more other then that? |
Title: Re: pulling the rear turn signals Post by james may on 07/22/10 at 12:34:45 Dunno if you have saddle brackets or a sissy bar but there are 2 more on the back that hold on the saddle bracket and one doubles through the sissy on mine so that's 5 each side. Yours may only have the 3. You can get at em with alittle wiggling and a box wrench. |
Title: Re: pulling the rear turn signals Post by Hashbrown on 07/22/10 at 12:36:37 yeah i have a sissy bar (95 savage) but no saddle brackets. thanks guys |
Title: Re: pulling the rear turn signals Post by Tanker2Biker on 07/22/10 at 15:43:51 You can make yourself a little extra room if you need it by disconnecting the shocks and jacking it up. That lets the back tire drop a little and make more space between the tire and fender |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |