SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Axle nut /cgi-bin/YaBB.pl?num=1276787691 Message started by Bubba on 06/17/10 at 08:14:51 |
Title: Axle nut Post by Bubba on 06/17/10 at 08:14:51 Got my mew tires but I can't loosen the rear axle nut for the life of me! Does anyone know what size that nut is. I tried a big cresent but it wouldn't budge. Also, on the opposite side is a bolt that seems to spin when I try to loosen the axle nut. The specs say the axle nut should be torqued at 40-60 ft/lbs...I would think I should be able to loosen that without a breaker bar but I'm not sure. Thanks |
Title: Re: Axle nut Post by kevinphan on 06/17/10 at 08:36:17 24mm and 17mm if I remember correctly |
Title: Re: Axle nut Post by Bubba on 06/17/10 at 08:48:39 Thanks! |
Title: Re: Axle nut Post by Tiefighterpilot on 06/17/10 at 16:24:16 I had to almost stand on mine to make it move. |
Title: Re: Axle nut Post by Bubba on 06/17/10 at 20:01:38 went to NAPA, bought a 24mm combination wrench for 6.99 (about a foot long) and broke it free with some effort. woo hoo |
Title: Re: Axle nut Post by BurnPgh on 06/17/10 at 20:11:59 Make sure you get it just as tight when you put everything back. Didnt tighten my axle bolt on my rebel enough and a couple weeks later the nut vibrated loose and fell off. Luckily I felt a wiggling in the rear and pulled over and was able to call for help but it couldve ended very badly. |
Title: Re: Axle nut Post by Bubba on 06/17/10 at 20:19:32 Fer sure. It will be tight! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |