SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> handle bar risiers /cgi-bin/YaBB.pl?num=1275997737 Message started by aphico on 06/08/10 at 04:48:57 |
Title: handle bar risiers Post by aphico on 06/08/10 at 04:48:57 anybody make there own risers? I put drags on her and they hit the tank. |
Title: Re: handle bar risiers Post by verslagen1 on 06/08/10 at 07:09:42 You can use a couple of 3/4" sockets and get longer bolts 3/8" x whatever. |
Title: Re: handle bar risiers Post by aphico on 06/08/10 at 08:00:50 man, thats exactly what i was thinking, but was worried about it slipping so i was gonna fill the socket with epoxy. I'm gonna go work on that right now. can someone remind me of how to post pics, i can't remember what to put inbetween the img brackets, tried "copy" "paste" ? thanx. |
Title: Re: handle bar risiers Post by verslagen1 on 06/08/10 at 08:49:18 Once you tighten it down, it won't slip. upload your image to some server Not sure but open the pict w/o being logged in to the account right click on the pict and select properties highlight the entire address should have a http on the front and a jpg on the end and paste that in the middle of the image brackets. |
Title: Re: handle bar risiers Post by Serowbot on 06/08/10 at 09:05:43 I used some BMX bicycle footpegs... http://p1.bikepics.com/pics/2008%5C06%5C03%5Cbikepics-1310115-800.jpg |
Title: Re: handle bar risiers Post by Phelonius on 06/08/10 at 09:42:06 I made ther ones on the Webley Vickers from 1 inch square aluminum billet.. Tapered nat the top and turned to match the fit of the crown cap. That way I got the height of bars with the super bar and extensions without having to lengthen the cables. Phelonius |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |