SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Header Wrap Question /cgi-bin/YaBB.pl?num=1275457220 Message started by Tiefighterpilot on 06/01/10 at 22:40:19 |
Title: Header Wrap Question Post by Tiefighterpilot on 06/01/10 at 22:40:19 Is it recommended that header pipe be removed before wrapping? I am concerned about the muffler joint misaligning and it has good seal now, but prob will not if I remove the header pipe/muffler from bike to wrap. |
Title: Re: Header Wrap Question Post by Horatio Hawkshaw on 06/02/10 at 05:12:26 It can be done with the pipe still on the bike, but it's a lot quicker and a lot easier to get a good, tight, consistent wrap with the header off. And you won't use as many epithets :D |
Title: Re: Header Wrap Question Post by earlytimz on 06/02/10 at 05:41:57 +1 Can you remove the whole exhaust in one piece? That way you wouldn't interrupt the muffler to head-pipe connection... As H H said, I'm sure it can be done but better to take it off... |
Title: Re: Header Wrap Question Post by wolfmrp on 06/03/10 at 08:26:25 You will be a lot happier is you remove it. Really :) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |