SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> need help finding jet please.... /cgi-bin/YaBB.pl?num=1275013001 Message started by ky04savage on 05/27/10 at 19:16:40 |
Title: need help finding jet please.... Post by ky04savage on 05/27/10 at 19:16:40 does anyone know where i can find jets that are bigger than the 230 main jet that i have? i still seem to be running too lean. i know that the stock main is 145 and i got a jet kit and the biggest one is a 230. does anybody make bigger than that? i thank u for all your help. |
Title: Re: need help finding jet please.... Post by verslagen1 on 05/27/10 at 19:18:27 if you need bigger than 165, you got problems and it's not the lack of bigger jets. what tells you that you need a bigger jet? |
Title: Re: need help finding jet please.... Post by BurnPgh on 05/27/10 at 19:20:32 what mods do you have and what jet kit did you get? Dynojet kits are sized differently. If you're got a freer flowing muffler and kn filter you'd be looking from 152.5-160 or so for a main jet but where on the throttle do you seem to be lean? low end, mid range? |
Title: Re: need help finding jet please.... Post by Serowbot on 05/27/10 at 19:21:47 +1,... bigger than that is just a hole!... :-?... |
Title: Re: need help finding jet please.... Post by mikelhsr1982 on 05/27/10 at 19:56:39 If I have a cone filter and straight pipe, what size jet will I need to get? |
Title: Re: need help finding jet please.... Post by earlytimz on 05/28/10 at 07:09:08 787C7E70797D6667242C2D27150 wrote:
My guess would be a 152.5 or 155. Try the smaller one first & if you get popping (lean) above 1/4 throttle, go with the 155. Get a hold of Lancer... He will send you a small variety that covers the spectrum. Cheap too! Don't forget to follow the procedures in the forum to set your idle mixture & needle spacing. Ky04... Where are you located bro? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |