SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Timing chain replacement and Sally goes SPLAT! /cgi-bin/YaBB.pl?num=1272054290 Message started by PipJones on 04/23/10 at 13:24:50 |
Title: Timing chain replacement and Sally goes SPLAT! Post by PipJones on 04/23/10 at 13:24:50 Replaced my timing chain today and when i went to crank her up in stead of hearing whomp whomp... whomp whomp..... boom!!!! i heard whooooooooooooooow whoooooooooooooow, i.e. no compression. anyhow, removed what was neccessary to look at valves and nothing was damaged. i just don't have her in time. I see the timing marks on the cam sprocket but where are they on the crankshaft???? i saw a dot on the lower timing chain sproket (the one that sits on the crank) but that one can come off the splined crankshaft...... so i don't know what that's about. Are the timing marks on the stater side?? or am i missing something. I def need to get this done in a hurry cuz its BEEN riding season. Any help would be greatly appreciated. ~ Pip Jones |
Title: Re: Timing chain replacement and Sally goes SPLAT! Post by verslagen1 on 04/23/10 at 13:31:46 Set the crank on TDC as seen in the "how to adjust your valves" post. set the cam with the marks horizontal and the alignment pin at 1 o'clock. |
Title: Re: Timing chain replacement and Sally goes SPLAT! Post by PipJones on 04/23/10 at 13:37:15 Is it just my computer or is that link broken. Every time I try to click on it from the TOC list, it kicks me to the "forum" page where you can select rubber side down, tech doc, etc. |
Title: Re: Timing chain replacement and Sally goes SPLAT! Post by Mr. Hyde on 04/23/10 at 13:53:31 Not your computer it's been that way for awhile. I've posted about it but..... |
Title: Re: Timing chain replacement and Sally goes SPLAT! Post by verslagen1 on 04/23/10 at 14:04:15 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1255580802 Maybe if you posted about with a snapshot of lancer's beauty... |
Title: Re: Timing chain replacement and Sally goes SPLAT! Post by Oldfeller on 04/24/10 at 08:20:35 If he's talking about incorrectly timing the chain on the cam sprocket that's a different case of OOOPS. Go here and have a look at installing/timing the chain vs sprocket vs all the other alignment elements that are needed ..... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1256079122/15 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |