SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Check your Sunday paper for Harbor Freight ad
/cgi-bin/YaBB.pl?num=1269777098

Message started by Oldfeller on 03/28/10 at 04:51:38

Title: Check your Sunday paper for Harbor Freight ad
Post by Oldfeller on 03/28/10 at 04:51:38

FREE FLASHLIGHT
(nice little flashlight complete w/batteries)

$1.99 mulitmeter
$2.79 plastic tarp (heavy blue tarp)
$3.99 float charger
$4.99 screwdriver set includes #3 Phillips
$6.99 cut off tool
$6.99 metric wrench set
$9.99 electronic caliper
$15.99 heavy duty 41/2" angle grinder

We have talked about this stuff before and if you haven't gone to HF yet you owe it to yourself to do so.

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by Phelonius on 03/28/10 at 10:08:04

I have been patronizing Harbor Fart since about 1990. In fact I am awaiting a catalog order now.

Phelonius

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by Ed L. on 03/28/10 at 13:02:53

The 4 1/2 inch grinder can't be beat. Got one last year and have beat ther c*ap out of it, it's like the old Timex ad, takes a licking and keeps on ticking. Love Harbor Freight

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by justin_o_guy2 on 03/28/10 at 13:19:17

You can aboput anything there. Well, except a set of 1/4" extensions. Ive been hunting forever. Maybe theyre online?

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by Oldfeller on 03/28/10 at 13:31:29

They sell extensions in extension kits 1/4, 3/8 and 1/2 are in one big kit. I needed some LONG ones, so I bought a kit.

I also bought a 3/4" drive ratchet which I use to take axle nuts off with a huge socket and a 4 foot piece of pipe for standing on it & bouncing.

I abuse the HF stuff a lot, but it very rarely fails -- but before failing the few bits I killed I always got my $$$ worth out of it anyway.

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by justin_o_guy2 on 03/28/10 at 13:33:35

Im pretty ok on the 3/8 & 1/2 stuff. Maybe I otta look at the kit tho. If its cheap enough, Ill do it.

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by justin_o_guy2 on 03/28/10 at 13:34:20

as long as it has the 1/4 stuff I need.

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by serenity3743 on 03/29/10 at 09:04:01

I don't have no steenking Harbor Freight! :(

Title: Re: Check your Sunday paper for Harbor Freight ad
Post by youzguyz on 03/29/10 at 09:13:35

one thing I did not see online was a 27mm wrench.. in any of the sets or individual.
27mm sockets..yes. No wrench though.
On something that large, I can probably get an SAE size to do the job.

They do have the electric impact driver.. which I will need!