SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Okay this is a PITA
/cgi-bin/YaBB.pl?num=1269581747

Message started by jlsmedic on 03/25/10 at 22:35:47

Title: Okay this is a PITA
Post by jlsmedic on 03/25/10 at 22:35:47

Hey is there some trick to getting the air box out ..... Ive been working on it for a while and i cant figure out where it is supposed to come out??? any help would be great.

Title: Re: Okay this is a PITA
Post by Serowbot on 03/25/10 at 23:21:59

Well,.. if the really big hammer don't work,.. then, you have to resort to the shotgun,,, ;D ;D ;D...

No,.. I don't really know... :-?...

PS,.. just PM'ed you... ;)

Title: Re: Okay this is a PITA
Post by jlsmedic on 03/25/10 at 23:22:40

NO... I just PM'd you ....and im at the shotgun stage....
;D

Title: Re: Okay this is a PITA
Post by jabman on 03/25/10 at 23:58:38

i struggled with it i had a random bolt holding it round the back hear the belt drive/guard

it will be worth it :)

Title: Re: Okay this is a PITA
Post by jlsmedic on 03/26/10 at 01:01:27

aaaahhhh hem (clears throat)..... FYI incase you wanted to put some breather holes in your air box... First take off your tank. take off your carb... then take off the battery and the batt box. then you can take the air box out... with one or two mutherfu#%$ in the middle. lol its out... this SOB better scream when its runnin again...

Title: Re: Okay this is a PITA
Post by jabman on 03/26/10 at 11:35:24

080E110F07060B01620 wrote:

it will if you get the carb set up just right :)

Title: Re: Okay this is a PITA
Post by dasch on 03/26/10 at 12:51:53

yup... ;)

Title: Re: Okay this is a PITA
Post by Oldnewguy on 03/28/10 at 12:34:50

I ended up using a Dremel and cutting out the top and front of the MFer. There is a "mystery screw" somewhere on the bottom. I am not sure if anyone has ever found it. It worked out OK though cause I was able to put the side panels back on. I want to move my battery back so I have more room for the K&N etc. but I havn't got that all figured out yet. :-/

Title: Re: Okay this is a PITA
Post by wolfmrp on 03/28/10 at 15:10:14

I used a pair of tin snips, a chisel and a hammer. I wish I had thought of the dremel. ::)

The mystery screw is located towards the bottom behind the muffler.

Title: Re: Okay this is a PITA
Post by Oldnewguy on 03/28/10 at 15:16:21

The Dremel worked OK but I knicked a wire in the process. I think I saw the screw once but I was using a mirror and had no idea where it really was. :(