SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> reducer sleeve for harley dyna muffler install /cgi-bin/YaBB.pl?num=1267953868 Message started by siriusjoe on 03/07/10 at 01:24:28 |
Title: reducer sleeve for harley dyna muffler install Post by siriusjoe on 03/07/10 at 01:24:28 I'm collecting the parts needed for a Harley Dyna muffler upgrade, and I didn't want to buy anything from "flightsimshop" on Ebay... So I found another source for the 1.75"-1.5" reducer sleeves here: http://www.mikesxs.net/products-44.html#product-07-4631 They take PayPal too. |
Title: Re: reducer sleeve for harley dyna muffler install Post by thumperclone on 03/07/10 at 07:06:16 an aluminium can or plumbers strap & rtv |
Title: Re: reducer sleeve for harley dyna muffler install Post by Serowbot on 03/07/10 at 08:19:28 I use a strip of tin can, and cut extra slots in the muffler to allow a bit more compression for the clamp... I've installed them on 5 bikes.... |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |