|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> new bars /cgi-bin/YaBB.pl?num=1267750888 Message started by WebsterMark on 03/04/10 at 17:01:27 |
|
Title: new bars Post by WebsterMark on 03/04/10 at 17:01:27 looking for different bars than stock ones on 2007 model. want something a little higher, closer to my body and with the ends angled in a little. When I look on jc whiteny for example, they define bars like: 4.8", Rise: 7", Pullback: 9.2", Bend: Nighthawk, Width: 28", 7/8" Outside Diameter does anyone know the corresponding dimensions for stock 2007 bars so I can compare? |
|
Title: Re: new bars Post by verslagen1 on 03/04/10 at 17:57:19 what that stuff means... http://www.sideroadcycles.com/ImportedMotorcycles/ImportHandlebars/ImportHandlebars.html |
|
Title: Re: new bars Post by Serowbot on 03/04/10 at 18:11:28 Drag bars or pullback?... You need 1" bars,... shape is up to you, but they must be 1"... ;) |
|
Title: Re: new bars Post by Paladin. on 03/04/10 at 19:37:45 142621303726310E223128430 wrote:
We use the same bars as Sportsters. Jireh Cycles http://www.jirehcycles.com/ has a lot to choose from for not a lot of cash. You can donwload the 44MB PDF catalog or they'll send you the CD. |
|
Title: Re: new bars Post by babyhog on 03/05/10 at 05:45:12 I bought mine on ebay for about $15. There was some gooey stuff stuck to the bar where the grips go (old dried glue, I guess), and a little bit in other places, so the pictures looked bad. The seller didn't try to clean them. But once I received them, they cleaned up perfectly. Just took a little elbow grease. Don't know what brand they are, but they are 1" and were shaped like I wanted. Figured for $15, what the heck? But they worked out great. I tried to Google the markings, but couldn't come up with much, except the numbering was similar to HD's. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |