SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> carb size /cgi-bin/YaBB.pl?num=1265835575 Message started by kempo on 02/10/10 at 12:59:34 |
Title: carb size Post by kempo on 02/10/10 at 12:59:34 hi could some one let me know what the standard carb size is on the savi. thinking of changing to round cable slide type or flat. |
Title: Re: carb size Post by BurnPgh on 02/10/10 at 14:11:13 36 or 38mm roundslides are the generalluy accepted improvements. Look into Lancer's carb kits. You get all kinds of extra goodies with it including necessary custom throttle cable and intake flange, Dial-a-jet, UFO, extra jets, iridium spark plug, manual, carb tool etc etc. ps - no offense intended but questions are for rubberside down. Tech section is for how-tos. |
Title: Re: carb size Post by LANCER on 02/10/10 at 16:10:22 + If you are going to use a roundslide then do stay with the 36/38mm size. Air velocity in the carb bore slows too much otherwise. If your engine is totally stock and just running a HD muffler or similar, go for the 36mm carb. It will work better for the low-mid range. |
Title: Re: carb size Post by Yonuh Adisi on 02/10/10 at 21:15:24 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1120506946 |
Title: Re: carb size Post by kempo on 02/16/10 at 12:37:16 yeah was thinking of going with the 36mm round slide carb. what size jets do ya think.? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |