SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> What do you think about a torque screwdriver? /cgi-bin/YaBB.pl?num=1264645891 Message started by prechermike on 01/27/10 at 18:31:30 |
Title: What do you think about a torque screwdriver? Post by prechermike on 01/27/10 at 18:31:30 Ok, I need to do the head plug thing. I only have a 1/2 inch drive torque wrench. I found this: http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=65397 What do you guys think? Thanks |
Title: Re: What do you think about a torque screwdriver? Post by verslagen1 on 01/27/10 at 18:59:39 How much use is 3 ft-lbs of torque? Get the 1/4" drive when it goes on sale. |
Title: Re: What do you think about a torque screwdriver? Post by justin_o_guy2 on 01/28/10 at 03:09:41 Sears has a beam type 3/8 torque wrench I used for some job on the bike, worked fine. Cheap enough. |
Title: Re: What do you think about a torque screwdriver? Post by Max_Morley on 01/28/10 at 10:18:19 You won't have room to use the torque screwdriver on the head cover due to frame and other items of interference. Max |
Title: Re: What do you think about a torque screwdriver? Post by Oldfeller on 01/29/10 at 13:08:20 http://wscope.com/images/convert.jpg find me at http://wscope.com/convert.htm ============ Preacher Mike, you need to go on-line and get a copy of Convert.exe which is a program that exchanges one measurement type to another easily and accurately. 39 inch pounds isn't enough torque to do a side cover or a head cover, not by a factor of 2-3 anyway. I use a 0-120 inch pound quarter inch drive beam torque wrench that is simple, easy to use and plenty accurate. |
Title: Re: What do you think about a torque screwdriver? Post by mick on 01/30/10 at 03:13:22 Never owned a torque wrench,never used one,never had an oil leek. It's all in the feel. |
Title: Re: What do you think about a torque screwdriver? Post by Peteraa on 01/30/10 at 07:17:52 Thank you Oldfeller,that converter was just what I needed.Peter |
Title: Re: What do you think about a torque screwdriver? Post by bill67 on 01/30/10 at 07:41:14 0D09030B1408050C090D0519600 wrote:
I bought one 2 years ago but haven't used it,I agree its in the feel. But then Mick we have been feeling a long time. ;D |
Title: Re: What do you think about a torque screwdriver? Post by Savage_Amusement on 01/30/10 at 17:47:38 Have to be real careful with those stock bolts any how. I tried to set one to spec and it started to twist off, I don't really have any stock ones left anymore. |
Title: Re: What do you think about a torque screwdriver? Post by prechermike on 01/30/10 at 18:01:36 Thanks guys. I really am looking for an affrordable cliker torque wrench. Just have to get the money right! ;) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |