SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Interchangable Suzuki parts with SAVAGES? HELP!!!!
/cgi-bin/YaBB.pl?num=1263934235

Message started by Need Parts dude on 01/19/10 at 12:50:35

Title: Interchangable Suzuki parts with SAVAGES? HELP!!!!
Post by Need Parts dude on 01/19/10 at 12:50:35

I need to know what years of Suzuki are interchangeable with a 1986 SAVAGE 650ls, because I need some parts for my engine-clutch carb ect. and I don't want to buy expensive parts online.

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by BurnPgh on 01/19/10 at 12:51:58

clutch is different. Engine and carb are the same through all years except for the jets in the carb. What exactly are you looking for?

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by Yonuh Adisi on 01/19/10 at 12:55:23

Give us a list of the parts you actually need and I am sure we can let you know what will interchange.

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by Need Parts dude on 01/19/10 at 12:58:58

I need the carb, the clutch assembly and all electrical. In othe words the engine is fine but has most of it's other parts removed.

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by Yonuh Adisi on 01/19/10 at 13:09:47

Carb is interchangeable through all the years (just jet sizes are different as stated above). Clutch I am not sure about, and I just sold a wiring harness to another member that would have more than likely worked for you.

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by BurnPgh on 01/19/10 at 13:13:55

the carb you can get on ebay for pretty cheap. Or if you havent found one by spring time i'll sell you mine as im switching to a VM. The wiring harness (i assume you need the cdi box too) is going to be trickier unless someone here has one. You might find one on ebay but it's got to be for an 86-88 model. The cdi is probably going to be quite pricey but you may find one on ebay. The cdi also has to be for an 86-88 model. Do you have a starter motor? I dont know if all years are interchangeable for starters but if they are get a newer model one. I dont know about clutch basket interchangeability.

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by verslagen1 on 01/19/10 at 14:22:24

carbs are interchangeable, but not exactly the same.
clutch is the same but the basket is not because primary gears are different.
Wiring for an 86 is different. Don't know if they are interchangeable with later years, but other then the controls and the kick stand switch, most other component connectors are the same.
CDI is different. Don't know if they are interchangeable with 87 or 88. not interchangeable with 95 on.

Dude where are you at? There might be locals that can help you out.

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by Need Parts dude on 01/19/10 at 17:43:42

I live in central ohio.

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by trublu on 01/29/10 at 09:25:44

362532332C2127252E71400 wrote:

Verslagen, do you know what problems running an 86 CDI (bike is an 86) on a say a 95 or later engine will cause??

And, It WILL need the later CDI to run right , or the 86 one?

Also ,if it needs the later model CDI, is it a straight swap out with no mods needed to the 86 wiring,etc?

THANKS in advance 8-)

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by WillC on 03/07/10 at 15:22:16

does anyone know what sidebars you can use to replace the stock savage sidebars if you want to take the sissy bar off?

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by Serowbot on 03/07/10 at 15:31:56

35212A2B32322B212A420 wrote:

does anyone know what sidebars you can use to replace the stock savage sidebars if you want to take the sissy bar off?

The kind from a Savage without a sissybar... :-?

They will bolt up fine... ;D

Title: Re: Interchangable Suzuki parts with SAVAGES? HELP
Post by LANCER on 03/07/10 at 17:34:16

777379727B7F76757C78766F7F1A0 wrote:

I need the carb, the clutch assembly and all electrical. In othe words the engine is fine but has most of it's other parts removed.

I have a complete carburetor; fully rebuilt by me.

It has been completely disassembled, checked, cleaned, jetted with #52.5 pilot, 152.5 main jet, the white spacer has been filed to 1/2 its stock size; the pilot screw assembly is new and set at 1.5 turns out for a good starting point for your fine tuning, and the slide has been messaged with secret carb fairy dust to make it more responsive; & a new float bowl gasket on its bottom as well.

It is ready to bolt on and go.

This is better than a new stock carburetor.

It is $100 + $10 for shp in the US = $110 total, and can be sent via paypal to "savage.s40@gmail.com"

If you choose not to take it then it will go on ebay for $175.

PM me if you are interested.