SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Box meter gear replacement question? /cgi-bin/YaBB.pl?num=1262582374 Message started by JohnBoy on 01/03/10 at 21:19:34 |
Title: Box meter gear replacement question? Post by JohnBoy on 01/03/10 at 21:19:34 Making the speedo match the final drive in a chain conversion? OK, so I can't replace the speedo drive shaft. Well the other end of the cable is connected to the "Box Meter Gear" This part number is: 34131-19B00 which replaces the part number 34131-33450 The box meter is listed in several models BOX, METER GEAR MODEL 34131-19B00 V/W/X/Y/K1/K2/K3/K4 I have to assume that the different models reflect different gear ratios. This box gear is listed on the following models bikes and ATV's: LTF300Y ATV LTF4WDX King Quad GSX-R750W GXR-R1100W LS650 (maybe others) How do I find out if any of the different box gears would work for a 17/45 or a 17/43 chain conversion to give accurate apeed and mileage numbers? Thanks for your insite and feed back. JB |
Title: Re: Box meter gear replacement question? Post by verslagen1 on 01/03/10 at 21:35:20 It would be much easier to fit a front wheel driven speedo. I acquired a drive gear when I bought a GS450 wheel, which is the same size as ours. The rest should be easy. |
Title: Re: Box meter gear replacement question? Post by justin_o_guy2 on 01/03/10 at 22:26:10 GPS? Bicyclle speedo? |
Title: Re: Box meter gear replacement question? Post by Yonuh Adisi on 01/05/10 at 11:36:42 Speed past a cop and while he is writing you the ticket ask what your speed was and compare it to what was indicated? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |