SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> kn part # - this dead horse is thoroughly beaten /cgi-bin/YaBB.pl?num=1261645750 Message started by BurnPgh on 12/24/09 at 01:09:10 |
Title: kn part # - this dead horse is thoroughly beaten Post by BurnPgh on 12/24/09 at 01:09:10 I 've got the Kn cone part #'s to hook directly to the carb. I'm really looking for a Kn cone with 2in ID. Is there such a creature? Looked extensively on ebay and google but to no avail. Looking to emulate Djs set up (more or less). 2in pvc for turbulator in the air intake tube and a 2in ID Kn cone to connect. I prefer a tight fit but will go with the 2 1/4" if need be. Any suggestion appreciated. |
Title: Re: kn part # - this dead horse is thoroughly beat Post by LANCER on 12/24/09 at 06:03:17 6354534F714649210 wrote:
You will not find a cone filter of any kind that fits the stock or a performance carb that has an OD of less than 3". |
Title: Re: kn part # - this dead horse is thoroughly beat Post by Phelonius on 12/24/09 at 09:35:47 Some mods simply require that you manufacture them yourself. You might start by looking at various pvc fittings to see what might be adapted. Bell reducers come to mind. Phelonius |
Title: Re: kn part # - this dead horse is thoroughly beat Post by BurnPgh on 12/24/09 at 11:27:33 alrighty. With all the variations KN has out i imagined there'd be one but...jerry rig it is |
Title: Re: kn part # - this dead horse is thoroughly beat Post by sluggo on 12/24/09 at 14:28:50 4770776B55626D050 wrote:
we call them mods... |
Title: Re: kn part # - this dead horse is thoroughly beat Post by BurnPgh on 12/24/09 at 16:53:36 im farmiliar with the term as my chain drive and cast wheels can attest. I just figured with so many kn variations this would be one simple thing i wouldnt have to mod. |
Title: Re: kn part # - this dead horse is thoroughly beat Post by justin_o_guy2 on 12/24/09 at 21:31:14 HA!, Never happen |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |