SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> pri gears /cgi-bin/YaBB.pl?num=1261378382 Message started by raggedred on 12/20/09 at 22:53:02 |
Title: pri gears Post by raggedred on 12/20/09 at 22:53:02 will the pri. gears from 4speed fit in the 5speed |
Title: Re: pri gears Post by T Mack 1 - FSO on 12/22/09 at 10:07:17 Somewhere here I read that they are not. Unfornuately, the only way to really find out is to tear down a 4 spd & a 5 spd and compare. |
Title: Re: pri gears Post by MMRanch on 12/23/09 at 21:14:24 I HAD A 4 AND 5 SPEED PRIMARY AT THE SAME TIME IN MY HAND AND THE 4 SPEED WAS A HIGHER RPM RATIO . AS IN LESS TOP END ... I WAS LOOKING TO LOWER HIGHWAY. I HAVE A 96 MODLE 5 SPEED. THE WAY TO GO WOULD BE ; HAVING A 4 SPEED BIKE AND PUTTING IN THE 5 SPEED PRIMARY GEARS. IT SEEM I HAVE NEVER HAD A BIKE WITH LONG ENOUGTH LEGS AND A FIRST GEAR THAT STILL PULLS WHEELES. I SAW A BIKE REVIEW ONCE THAT IMPLYED THE DR 650 WAS LONG LEGGED. |
Title: Re: pri gears Post by raggedred on 12/23/09 at 23:37:42 but will they fit |
Title: Re: pri gears Post by raggedred on 01/21/10 at 16:09:57 again will they fit |
Title: Re: pri gears Post by BurnPgh on 01/21/10 at 17:57:57 been talked about several times but no ones tried it that i know of so all answers are speculation. You'd have to try and tell us whether it does or doesnt work. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |