SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> head cover bolts /cgi-bin/YaBB.pl?num=1259097840 Message started by kennycreed on 11/24/09 at 13:24:00 |
Title: head cover bolts Post by kennycreed on 11/24/09 at 13:24:00 Hi all, would anybody know what the type bolts that are used to torque the head cover down are called,,cheers |
Title: Re: head cover bolts Post by verslagen1 on 11/24/09 at 13:35:36 Bolts... but perhaps I don't understand your question. |
Title: Re: head cover bolts or studs maybe screws?? Post by kennycreed on 11/24/09 at 14:24:59 the ones that hold the head cover on to the cylinder head they are hex topped with flat underside like a washer cheers |
Title: Re: head cover bolts Post by nicka on 11/24/09 at 14:53:22 mine (2003) Savage are 10mm (wrench size) hex with washer as part of the bolt head as you described. I don't have the chromed plastic covers, so I just went out and looked at them. |
Title: Re: head cover bolts Post by Serowbot on 11/24/09 at 16:11:37 Do you mean,... Chrome dome topped dealies?... "Acorn nuts"?... :-? |
Title: Re: head cover bolts Post by nicka on 11/24/09 at 19:40:04 Sero No. I assume he meant the valve covers; they are as I described and sort of black. Nick |
Title: Re: head cover bolts Post by kennycreed on 11/25/09 at 00:06:16 Yep!! Nick that's them, valve cover holder downers, I was wondering if there was a special name for them(apart from swears) as they have the washer incorporated(phew, that's a big one) In them. Mine are getting a bit round on the hex as they've been on and off so often, so I am looking to buy new ones but I would need to know the right mechanical(another big one) name for them,,,cheers |
Title: Re: head cover bolts Post by Serowbot on 11/25/09 at 00:23:08 Ahhh!,...the confusion comes from us having a dress up cover,... then valve covers,... then a cam cover.... I believe they are called "Indented Hex Washer" bolts... Indented... for the dip on top Hex... for the head shape Washer... for the washer bottom... Here's a link... http://www.precisionscrewandbolt.com/bolt_types.htm |
Title: Re: head cover bolts Post by kennycreed on 11/25/09 at 00:46:09 Yippeeee!!!!!! At last, I don`t have the plastic chrome covers either as well also and that's what was causing the confusion |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |