SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Stator cover bolt pattern /cgi-bin/YaBB.pl?num=1259041960 Message started by verslagen1 on 11/23/09 at 21:52:40 |
Title: Stator cover bolt pattern Post by verslagen1 on 11/23/09 at 21:52:40 anybody got one? |
Title: Re: Stator cover bolt pattern Post by justin_o_guy2 on 11/23/09 at 22:25:05 Wouldnt the holes in the stator cover be a good enough clue? |
Title: Re: Stator cover bolt pattern Post by Serowbot on 11/24/09 at 10:43:20 My stator probably has a bolt pattern,... Whass'a stator?... :-? Speaking of gaskets,... has anyone tried using two exhaust gaskets?.... Mine seems to bottom out ... |
Title: Re: Stator cover bolt pattern Post by serenity3743 on 11/24/09 at 10:45:01 594F58455D48455E2A0 wrote:
I have used two exhaust gaskets just so I don't have to put a new one in every time. It seems to work fine. |
Title: Re: Stator cover bolt pattern Post by verslagen1 on 11/24/09 at 11:45:21 wassa gasket? |
Title: Re: Stator cover bolt pattern Post by serenity3743 on 11/24/09 at 12:19:32 657661607F7274767D22130 wrote:
The big thin washer that is installed between the head and the header. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |