SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> oil leak(s) /cgi-bin/YaBB.pl?num=1255108829 Message started by Oldnewguy on 10/09/09 at 10:20:29 |
Title: oil leak(s) Post by Oldnewguy on 10/09/09 at 10:20:29 I have 2 or 3 small oil leaks one of which is the cylinder head plug. Is this a replace or reseal job? |
Title: Re: oil leak(s) Post by serenity3743 on 10/09/09 at 13:07:14 I've seen it done (and have done it) both ways. If you have the luxury of time to wait for a part, replace it. If not, one of the gasket sealant products should work. |
Title: Re: oil leak(s) Post by verslagen1 on 10/09/09 at 13:43:55 either way, you need to pull the head cover. do you really want to risk pulling it again for a used part? Not that I think a used part wouldn't seal but that's a $5 risk for several hours of work. |
Title: Re: oil leak(s) Post by Oldnewguy on 10/09/09 at 14:55:14 Thanks. I will definately replace it. I really don't like to reuse stuff unless it's necessary. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |