SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> TDC on reassembly /cgi-bin/YaBB.pl?num=1254081939 Message started by eanon on 09/27/09 at 13:05:39 |
Title: TDC on reassembly Post by eanon on 09/27/09 at 13:05:39 Besides setting tdc on the rotor with the timing mark on the crankcase, and setting tdc on the camshaft and camshaft sprocket with the index marks sprocket, do I need to set tdc any where else? do you align the index mark on the crankshaft with anything? http://i170.photobucket.com/albums/u274/eanonhorton/Clutch_Cover_07.jpg?t=1254081689 (photo courtesy of TMH CD.) |
Title: Re: TDC on reassembly Post by verslagen1 on 09/27/09 at 13:13:25 no the crank is a 2 stroke device untill it gots a cam (up, down) the cam is a 4 stroke device (suck, bing, bang, blow) once married together at TDC, till death they separate. |
Title: Re: TDC on reassembly Post by eanon on 09/27/09 at 13:30:14 thanks verslagen |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |