|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Side License Plate Mount /cgi-bin/YaBB.pl?num=1253573059 Message started by Stones on 09/21/09 at 15:44:19 |
|
Title: Side License Plate Mount Post by Stones on 09/21/09 at 15:44:19 Anyone got a picture of one of these fitted ? Thanks |
|
Title: Re: Side License Plate Mount Post by tran2112 on 09/21/09 at 16:26:16 Not a very good pic but I mounted mine off the wheel: http://images44.fotki.com/v1581/photos/8/52858/7974998/IMG_0624-vi.jpg |
|
Title: Re: Side License Plate Mount Post by SimonTuffGuy on 09/21/09 at 16:35:08 Not with my new seat... But, a decent shot of the plate: http://www.pimptiva.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=2762&g2_serialNumber=2 Picked off of EBay for $35 and shipping. The guy custom made it 2" longer from his normal units so that it would clear the belt guard. |
|
Title: Re: Side License Plate Mount Post by Demin on 09/21/09 at 17:16:33 Here's mine. http://p1.bikepics.com/pics/2009/08/08/bikepics-1749156-800.jpg |
|
Title: Re: Side License Plate Mount Post by PTRider on 09/21/09 at 20:05:58 Check your state laws, and any state you might ride into. Many states require the plate be horizontal and facing straight back. |
|
Title: Re: Side License Plate Mount Post by PerrydaSavage on 09/21/09 at 23:58:08 Was given a powdercoated side plate bracket off of flea-bay as a gift, couple years ago ... only to discover that Canadian plates (Nfld. & Manitoba I know for sure) are bigger than standard issue U.S. m/c lic. plates!! May mod it next year so my plate will fit, but for now it's mounted on the left lower shock bolt and has a "No Rules Riders" decal and a "#13" decal on it ... |
|
Title: Re: Side License Plate Mount Post by Savage Eddie on 09/22/09 at 04:16:00 heres the best pic i have but it is a easy mod. just need to make the brake light wiring longer and zip tie it to the inside of the rear arm. bolts right up to the axle bolt... oh yeah, Illinois law says no vertical plate....i say too bad! http://i170.photobucket.com/albums/u248/socomiou1/PICT0240.jpg http://i170.photobucket.com/albums/u248/socomiou1/128.jpg |
|
Title: Re: Side License Plate Mount Post by Rocco on 09/22/09 at 08:39:59 i've been wanting to move my plate, but i have no idea what to do with all the wiring to the light AND florida says no vertical plates either....so i might as well just leave it lol |
|
Title: Re: Side License Plate Mount Post by matt on 09/22/09 at 09:53:20 http://mchoffman.net/host/savage/side.jpg (advertisement from the PO ;D ) My neighbor cop says that we can have side plates in here (not sure if we ment the county or state). However, if i was you, i would trust my own research more then a strangers word of mouth. ;) For the wireing, it thought i felt a hole in the swing arm for some wires, i couldnt find it though. Some black wire and black zipties to match my black paint, run the wire up behind the frame or whatever seems suitable, i popped it up under the sear where i could pull it back and connect the wires. (PO wasnt a night rider so never botherd with lights, being young a cop-attracter in W.S. i made sure those lights worked) |
|
Title: Re: Side License Plate Mount Post by Demin on 09/22/09 at 15:48:16 Double check,I think Fl. changed the law back. |
|
Title: Re: Side License Plate Mount Post by kenshi on 09/22/09 at 18:21:44 http://img195.imageshack.us/img195/9711/dcp2553.th.jpg (http://img195.imageshack.us/i/dcp2553.jpg/) Used two 2 1/2 spikes for bottom fasteners....hehehe |
|
Title: Re: Side License Plate Mount Post by prsavage on 09/22/09 at 21:59:39 07060E0A0D630 wrote:
Nice paint on that intruder in front of your Savage. I need to decide on a paint theme/scheme for my Intruder. |
|
Title: Re: Side License Plate Mount Post by Stones on 09/25/09 at 00:34:43 Thanks for all the feedback and pictures ive put one on my shopping list :) |
|
Title: Re: Side License Plate Mount Post by Demin on 09/25/09 at 13:20:20 3B39333A3A5C0 wrote:
Nice paint on that intruder in front of your Savage. I need to decide on a paint theme/scheme for my Intruder.[/quote] Thanx.That's my partner's bike,at our shop. Here is a better pic of it. http://p1.bikepics.com/pics/2009/08/08/bikepics-1749168-800.jpg |
|
Title: Re: Side License Plate Mount Post by Stones on 09/26/09 at 02:19:48 Nice paint job 8-) Just seen these on ebay http://cgi.ebay.de/SIDE-MOUNT-NUMBERPLATE-BRACKET-SUZUKI-LS-650-Savage_W0QQitemZ110395922074QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item19b41c169a&_trksid=p4634.c0.m14.l1262 Any comments ? |
|
Title: Re: Side License Plate Mount Post by John_D on 09/29/09 at 02:44:07 4E4A43363E3137070 wrote:
I was going to say that it looks kinda tall for U.S. license plates, but just noticed it says you're in the UK, so that shouldn't be a problem. Looks pretty decent, but then I don't have a sideplate, so I'm not exactly the voice of experience. ;D |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |