SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Is this switch possible? /cgi-bin/YaBB.pl?num=1252777504 Message started by matt_savage on 09/12/09 at 10:44:58 |
Title: Is this switch possible? Post by matt_savage on 09/12/09 at 10:44:58 Is it possible to get rear turn signals that are integrated turn signals and rear brake/run lamps? I've seen a few choppers and Harleys with this setup and think it may be what I am looking to do. Thanks. -Matt |
Title: Re: Is this switch possible? Post by justin_o_guy2 on 09/12/09 at 10:47:08 Seems to me that if you can find the lamp housing, you could wire it. |
Title: Re: Is this switch possible? Post by Serowbot on 09/12/09 at 10:51:57 In many states the lens must be red... |
Title: Re: Is this switch possible? Post by verslagen1 on 09/12/09 at 10:52:11 http://cgi.ebay.com/ebaymotors/SUZUKI-GSXR-INTEGRATED-LED-TAILLIGHT-FENDER-ELIMINATOR_W0QQcmdZViewItemQQ_trksidZp4634Q2ec0Q2em14Q2el1262QQhashZitem27ab86ca09QQitemZ170381462025QQptZMotorcyclesQ5fPartsQ5fAccessories http://www.kapscoimports.com/ebay/images/TL_GJ_022_1_1_MAIN.jpg You might have to make a bracket. visit the store there's several types. |
Title: Re: Is this switch possible? Post by BurnPgh on 09/12/09 at 12:53:58 electricalconnection.com turn signal conversion kits., $50. Well worth the extra visibility and if a turn signal bulb goes out are still able to signal since the red leds and stock bulb alternate off/on while signaling. Or are you wanting a setup like they have on crotch rockets? |
Title: Re: Is this switch possible? Post by Staplebox on 06/22/10 at 15:52:42 Anyone try that taillight pictured above? I think it would fit with a homemade bracket. It looks a bit small though. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |