SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Buying Jets
/cgi-bin/YaBB.pl?num=1251475173

Message started by wrenchhead on 08/28/09 at 08:59:33

Title: Buying Jets
Post by wrenchhead on 08/28/09 at 08:59:33

I have an 08 and I currently have a Jardine exhaust with a #152.5 main and a #50 pilot, 3.5 turns on the idle mixture and 1/2 white spacer and I still get the occasional backfire. I would like to try a 155 main and a 55 pilot. I have been buying them on eBay but I have read about Mikuni jets and they are cheaper; I found this site: http://www.psep.biz/store/mikuni_main_jet.htm

Not sure which ones to buy. They have large round mains and small round mains, should I get the bleed type pilot?  Any ideas?

Title: Re: Buying Jets
Post by Mr. Hyde on 08/28/09 at 09:08:38

Contact Lancer on this forum. He's the jet man.

Title: Re: Buying Jets
Post by prechermike on 08/28/09 at 09:31:58


4A75294F7E6362070 wrote:
Contact Lancer on this forum. He's the jet man.


Yeah, what he said.

Title: Re: Buying Jets
Post by LANCER on 08/28/09 at 09:41:00


4045485E5E2D0 wrote:
I have an 08 and I currently have a Jardine exhaust with a #152.5 main and a #50 pilot, 3.5 turns on the idle mixture and 1/2 white spacer and I still get the occasional backfire. I would like to try a 155 main and a 55 pilot. I have been buying them on eBay but I have read about Mikuni jets and they are cheaper; I found this site: http://www.psep.biz/store/mikuni_main_jet.htm

Not sure which ones to buy. They have large round mains and small round mains, should I get the bleed type pilot?  Any ideas?


Assuming that there are  no air leaks in the exhaust (double check it), the Jardine usually would require a #52.5 pilot jet, and occasionally a #55 perhaps.  
Never go more than 3 turns out on the adj screw.  When you get into the 2.5-3 turn out range, it is a clear indication that you  need to go up to the next size jet.

Title: Re: Buying Jets
Post by Serowbot on 08/28/09 at 09:46:29

and it's the large round main........

Title: Re: Buying Jets
Post by wrenchhead on 08/28/09 at 09:55:52

I have checked for leaks several times after installing the exhaust. So far so good.

The #52.5 pilot jet, is that the ADPJ30525 on the site I listed earlier

What about the main jet? If I need to increase to the #155 is is the ADRMJ155?

Thanks for the help!

Title: Re: Buying Jets
Post by LANCER on 08/28/09 at 17:20:38


3B3E332525560 wrote:
I have checked for leaks several times after installing the exhaust. So far so good.

The #52.5 pilot jet, is that the ADPJ30525 on the site I listed earlier

What about the main jet? If I need to increase to the #155 is is the ADRMJ155?

Thanks for the help!


The mainn jet number is correct, but I could not find any pilot jets on that website.  Their price of $3.25 is fair.

Title: Re: Buying Jets
Post by K-Kustom on 08/29/09 at 12:29:57

http://www.psep.biz/store/mikuni_pilot_jet.htm

Title: Re: Buying Jets
Post by wrenchhead on 08/29/09 at 13:11:34

Thanks for all the help!

I posted the main jet page, should have posted this page:

http://www.psep.biz/store/mikuni_carburetor_part.htm

I ordered them; will keep you posted how everything goes.


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.