SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> should the main jet have a metal washer under it? /cgi-bin/YaBB.pl?num=1250927885 Message started by jabman on 08/22/09 at 00:58:05 |
Title: should the main jet have a metal washer under it? Post by jabman on 08/22/09 at 00:58:05 should the main jet have a metal washer under it there is on mine but with the state of the jets in it, i wouldent be surprised if it should not be there. |
Title: Re: should the main jet have a metal washer under Post by verslagen1 on 08/22/09 at 01:11:13 yes, there should be a washer |
Title: Re: should the main jet have a metal washer under Post by jabman on 08/22/09 at 01:35:57 i have a circlip on my needle. do i need to adjust that instead of my white spacer? |
Title: Re: should the main jet have a metal washer under Post by dasch on 08/22/09 at 03:07:30 Same with mine. Yes, try that first. If your mix doesn't get "greasy" enough, put circlip back all the way up (to lowest needle - lean), and ditch the washer. That gives you "the next adjustable step". You have two more grooves to go. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |