SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> cam ? ? /cgi-bin/YaBB.pl?num=1248383095 Message started by tfrawg75 on 07/23/09 at 14:04:55 |
Title: cam ? ? Post by tfrawg75 on 07/23/09 at 14:04:55 I have my motor apart to do cam chain and fix oil leaks on cylinder. My question is I've got motor on TDC what position should I put cam in? Do i line up marks on cam with head like is says in clymer's ? Or is there a better way? |
Title: Re: cam ? ? Post by Yonuh Adisi on 07/23/09 at 14:43:31 Yes, line up the cam marks like the Clymers says. |
Title: Re: cam ? ? Post by tfrawg75 on 07/23/09 at 14:46:41 alrite thanks . Just want to be sure . That clymer's is a little screwy on some things. lol Thanks again |
Title: Re: cam ? ? Post by Stimpy on 07/23/09 at 15:53:25 yup, marks lined up AND writing on top chain sprocket goes on top |
Title: Re: cam ? ? Post by verslagen1 on 07/23/09 at 16:39:04 With cam chain on the forward side taunt, the marks on the cam shaft should be horizontal and the pin at 1 o'clock. If not perfectly horizontal they should be up on the taunt side. |
Title: Re: cam ? ? Post by tfrawg75 on 07/23/09 at 16:53:23 not sure where the pin was but it fired up this time so that is better than the first time I put it together guess it moved from TDC I'm takin break now before puttin it all back together. |
Title: Re: cam ? ? Post by tomtaz1975 on 07/23/09 at 17:18:43 I haven't done it yet, (cam chain on the way!!!), but I am also planning on using this video and instruction guide as a reference... http://www.youtube.com/watch?v=nQMFq5jGTWw http://ls650.info/ValveAdjustment |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |