SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Flat plate under frame /cgi-bin/YaBB.pl?num=1248090510 Message started by PaulB on 07/20/09 at 04:48:30 |
Title: Flat plate under frame Post by PaulB on 07/20/09 at 04:48:30 My brand new 07 has a flat steel plate, maybe 4 inches square, welded to the main frame underneath the bike, just aft of the swingarm pivot. There are 2 tongues extending off the back or it, these tongues have about a half or 3/4 inch hole in them. I dont see that anything is attached to this plate nor the tongues, even the muffler bracket is a separate piece of metal . What is this plate for other than being a grreat place to use a lift???? thanks, paul |
Title: Re: Flat plate under frame Post by Savage_Amusement on 07/20/09 at 05:39:32 On the California models there is some emissions stuff stuck there. That is also where I relocated my rectifier to. |
Title: Re: Flat plate under frame Post by John_D on 07/20/09 at 07:36:08 It's also a great place to bolt a big ol' magnet on, to help trigger obstinate stop lights. ;D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |