SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Replacement Seat Suggestions???
/cgi-bin/YaBB.pl?num=1248066301

Message started by PTRider on 07/19/09 at 22:05:01

Title: Replacement Seat Suggestions???
Post by PTRider on 07/19/09 at 22:05:01

I've gott'a either get a new seat or a new butt. It'll be easier to get a seat.

Any suggestions on seats that fit the human anatomy and don't cost $400 or more? I'm thinking of buying a H-D King or Glide seat cheap (if I can find one) and trying to invent a mount. Possible and reasonable amount of work?

Anyone bought the H-D seat kit from fltsimshop on FleaBay and can you give the details?... (I know, don't do business with that guy).

Any other ideas? I've already tried padding the seat under the vinyl and that feels good for the first 20 minutes, then butt cramp sets in. I need a seat that is shaped better. I'd also like more height, but a better shape that is no lower will be great.

Title: Re: Replacement Seat Suggestions???
Post by BurnPgh on 07/19/09 at 23:43:49

sportster seats work (some years) but minor fabbing is needed i believe. I think someone put a vstar 650 seat on. Springer seats are fairly common but again require minor fabbing. Theres a simple and cheap seat lift mod. Those are your already tried and apporved methods so far as maintaining or increaing seat height. Im partial to the Diamond Jim seat mod which is basically cutting down and reshaping the stcok padding and the addition of some cheap wallyworld padding. You might try the seat lift and your own personal reshaping of the stock padding to get the best results for the money involved.

Title: Re: Replacement Seat Suggestions???
Post by Serowbot on 07/20/09 at 00:09:26

First, this is a seat from heaven compared to my last DP bike seat.

But second, I'm a creature of comfort, and here's what I did...

1. 1 1/2" seat lift.... Instructions are in the tech section
2. Reshaped the seatfoam, just a little, to flatten and slightly reduce the rear scoop...
3. Put a fake sheepskin cover over the vinyl... No kidding,... you'd be amazed at what a difference that tiny layer can make!....

My tender, boney, tush is way happier now..... ;D

Sorry,.. this is the best seat pic I can find...
http://i600.photobucket.com/albums/tt82/serowbot/DSCN0066.jpg?t=1248073635

Title: Re: Replacement Seat Suggestions???
Post by Gary On A Savage on 07/20/09 at 10:19:43

I installed a Sportster seat. Looks much better but is just as uncomfortable as the stock seat. Butt area was still to small with the "hump" poking me in the tailbone. Ended up with 2 of them thru a ebay bidding mistake, so I modded one. Cut the hump out of the butt area extending the flat sitting area back to give more room. Then I put glued high density foam (the thin blue pad stuff from wallyworld) on the stock foam to smooth it out and give a better ride. Much more comfortable. No room for 2-up, but I don't do that on this bike. Saved the unmodded HD seat for my dad who for some reason likes it better (smaller butt??).

Unless you buy a corbin sportster seat, you may end up having to mod any seat you put on it.

Title: Re: Replacement Seat Suggestions???
Post by serenity3743 on 07/20/09 at 10:21:16

I've just finished a 4th or 5th seat mod, basing it on the Diamond Jim design. Built up the seat pan with "Great Stuff" spray foam insulation, trimmed it to the curvature of the seat pan but left it more of less level from side to side for more butt cheek support. A few commutes later, it sill feels pretty good. Oh yeah, and I lifted the front of the seat about 1 1/2" last year. The sheepskin idea sounds good too.

Title: Re: Replacement Seat Suggestions???
Post by PTRider on 07/20/09 at 13:10:57

7076656E4878797648647661767072170 wrote:

I installed a Sportster seat. Looks much better but is just as uncomfortable as the stock seat.

I was talking with a Sportster owner who said that the first thing he did when he bought his bike was to get rid of the seat and buy one from Drag Specialties...not custom like Corbin and the rest, but much better than H-D. Lee Parks says that stock seats are great in the showroom to help sell bikes...easy to stand up astride the bike and they feel soft, but we all know the result after a few miles or few hours.

I'm surprised at the high prices asked for used Savage seats on fleaBay. I guess most get damaged when the bike is crashed. I'd buy a cheap one to experiment with, but not a pricey one.

Title: Re: Replacement Seat Suggestions???
Post by Yonuh Adisi on 07/20/09 at 13:22:32

7D7A65360 wrote:

Anyone bought the H-D seat kit from fltsimshop on FleaBay and can you give the details?... (I know, don't do business with that guy).

If you look closely you will see that FlightSimShop is really just selling a seat and instructions on how to convert it, instructions that you can get for free on this site.

Title: Re: Replacement Seat Suggestions???
Post by Gary On A Savage on 07/20/09 at 13:50:52

686F70230 wrote:

[quote author=7076656E4878797648647661767072170 link=1248066301/0#3 date=1248110383]I installed a Sportster seat. Looks much better but is just as uncomfortable as the stock seat.

Title: Re: Replacement Seat Suggestions???
Post by bill67 on 07/20/09 at 14:10:42

Harley has seats that you can get not cheap,but 14 1/2 wide in single seat and bucket double seats,Just look up Harley Davidson,14 1/12 is what you would need to get a comfortable seat.