SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Cylinder Head Torque Values /cgi-bin/YaBB.pl?num=1247939558 Message started by Educatedredneck on 07/18/09 at 10:52:38 |
Title: Cylinder Head Torque Values Post by Educatedredneck on 07/18/09 at 10:52:38 Ok I've read my Clymers, and even have a print out of all the torque values for the Savage, but for the life of me I can't find any info for the six cylinder head bolts in any of the tables. The table lists 8 and 9 mm bolts, but the ones I'm dealing with are 12 and 14 mm. Please help me!!!!! :) :) :) Many Thanks, Ray |
Title: Re: Cylinder Head Torque Values Post by verslagen1 on 07/18/09 at 11:01:22 8 and 9 refer to the thread size so 12 mm hex use the 8 mm torque and 9 mm torque for 14 mm hex. |
Title: Re: Cylinder Head Torque Values Post by Educatedredneck on 07/18/09 at 11:04:26 Ahh so the top four bolts use the higher torque value and the 12mm that are on the bottom use the lower value. Many Thanks!! Ray |
Title: Re: Cylinder Head Torque Values Post by Yonuh Adisi on 07/18/09 at 13:26:34 41564757565F5F4A405C5D330 wrote:
I was confused by that too but decided to just guess that they meant 9 =14 and 8 = 12. I thought it was just another Clymer's typo until I read a thread similar to this and breathed a sigh of relief that I guessed right on torque even though I got the reason wrong. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |