SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Who is in the VM club?
/cgi-bin/YaBB.pl?num=1247841201

Message started by odvelasc on 07/17/09 at 07:33:21

Title: Who is in the VM club?
Post by odvelasc on 07/17/09 at 07:33:21

Who out there is in the VM club? And what are your specs?I am running a 38mm roundslide with UFO, and Dial a Jet. I have a bled 15pilot and 155 main waiting on 150 and currently running the daj in the middle most setting. SHe is running amazing but a tad rich. I know that seviersavage is in the club, and perhaps Lancer still, and rigid as well if he is still around. This is the club to be in if you are not. Its a totally different bike.
8-)

Title: Re: Who is in the VM club?
Post by rigidchop on 07/17/09 at 09:08:24

i still have mine, dont remember the specs, but i love it.

Title: Re: Who is in the VM club?
Post by odvelasc on 07/17/09 at 16:36:18

hey Hey,

There is no going back from the vm.

Title: Re: Who is in the VM club?
Post by LANCER on 07/17/09 at 17:11:11

I am a multinational:
VM club
Amal club
Edelbrock club

Rex has an Edelbrock currently

Title: Re: Who is in the VM club?
Post by Savage_Rob on 07/17/09 at 17:23:10

I love my Amal.

Title: Re: Who is in the VM club?
Post by Toymaker on 07/17/09 at 17:30:16

Speaking of Rex, how is the old boy coming along???

T

Title: Re: Who is in the VM club?
Post by smokin_blue on 07/17/09 at 19:16:18

My cafe will be running in the TM club...36mm...jetting yet to be finalized. Heck I still need a rolling chasis first! (but it is close...updates to come) 8-)

Title: Re: Who is in the VM club?
Post by verslagen1 on 07/17/09 at 19:27:11

6469666B6D7A3A3F080 wrote:

I am a multinational:
VM club
Amal club
Edelbrock club

Rex has an Edelbrock currently

What no klein? ;D

Title: Re: Who is in the VM club?
Post by odvelasc on 07/17/09 at 19:35:18

3538373A3C2B6B6E590 wrote:

I am a multinational:
VM club
Amal club
Edelbrock club

Rex has an Edelbrock currently

Title: Re: Who is in the VM club?
Post by Boule’tard on 07/17/09 at 20:14:49

I got my membership fee in so I'll be in the vm club soon :D Very exclusive I hear.

Title: Re: Who is in the VM club?
Post by klx650sm2002 on 07/18/09 at 01:17:45

I really like my Keihin 41FCR except the price ! Note bellmouth made on my lathe/mill, other mods arrowed, haven't used the o-ring mod yet.
http://i119.photobucket.com/albums/o147/klx650sm2002/o-ringhighlighted.jpg
Clive W :)

Title: Re: Who is in the VM club?
Post by LANCER on 07/18/09 at 04:21:11

4E5D4A4B54595F5D5609380 wrote:

[quote author=6469666B6D7A3A3F080 link=1247841201/0#3 date=1247875871]I am a multinational:
VM club
Amal club
Edelbrock club

Rex has an Edelbrock currently

What no klein? ;D[/quote]

Say who ? ?

Title: Re: Who is in the VM club?
Post by LANCER on 07/18/09 at 04:36:16

757E6C7F767B69791A0 wrote:

[quote author=3538373A3C2B6B6E590 link=1247841201/0#3 date=1247875871]I am a multinational:
VM club
Amal club
Edelbrock club

Rex has an Edelbrock currently

I would like to see how your edelbrock looks on the bike. About amal's. I read that their contsruction material is not the greatest. Quite a bit of wear can occure on needle jets, valve etc.. The Amal's are used on a Brittish bikes? Rob I would like to see your set up. Maybe an idea of the performance of the bike using Amal or edelbrock?
Was chatting for a while with some fellows riding a heavily modified dyna and his pal with a fatboy. They started off on thumpers and were into the wrenching I did on the bike. They were impressed even more when I told them about Lancer's bike. [/quote]

I will try to get a photo of it today.
And for Toymaker; I have not taken Rex's head off yet since we have only been home 2 days, so I do not know yet what the condition inside the cylinder is. I am still trying to catch up getting the parts orders out that came in while we were playing with the new baby in NC while taken care of domestic requirements.