SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Needle clip lost.
/cgi-bin/YaBB.pl?num=1245894587

Message started by odvelasc on 06/24/09 at 18:49:47

Title: Needle clip lost.
Post by odvelasc on 06/24/09 at 18:49:47

Anyone know where I can order a new needle clip for a vm carb? I lost mine when it hit the ground while adjusting my needle. I McGyver'd a staple around the needle and its holding up pretty good so far after 3 days of riding lol

Title: Re: Needle clip lost.
Post by seviersavage on 06/24/09 at 19:18:51

I'm sure you can find it online but maybe a careful search with a magnet will turn up the clip?
Seviersavage

Title: Re: Needle clip lost.
Post by BouleTard on 06/25/09 at 12:00:45

Go to mcmaster-carr (http://www.mcmaster.com) and search for "circlips."  The E-style clips are available in really small sizes, like less than 3mm.  Of course you'll have to buy 100 of them.. for a whopping $3.50

Title: Re: Needle clip lost.
Post by odvelasc on 06/25/09 at 12:19:46


2A273D242D3C293A2C480 wrote:
Go to mcmaster-carr (http://www.mcmaster.com) and search for "circlips."  The E-style clips are available in really small sizes, like less than 3mm.  Of course you'll have to buy 100 of them.. for a whopping $3.50


Nice, thank you.

Title: Re: Needle clip lost.
Post by bill67 on 06/25/09 at 13:34:21

  I would think Ace hardware would have one that would fit.

Title: Re: Needle clip lost.
Post by Savage_Amusement on 06/25/09 at 15:01:09

Ace will have one, take your needle with you and you can buy just one, but maybe two or three might be a good idea lol.

Title: Re: Needle clip lost.
Post by odvelasc on 06/25/09 at 18:45:29

I live in Canada. We do not have ACE Hardware lol. We have Home Depot, Rona and Canadian Tire. What section should I look in?

Title: Re: Needle clip lost.
Post by BouleTard on 06/25/09 at 19:01:04

Home Depot aint got sheeit for metric hardware, or parts that small.  

I'd order the circlips and several other bolts that commonly fail (valve hatch bolts, anyone?) and that will justify the shipping.  Start a thread asking everyone what fasteners most commonly break, that they'd like to have in stainless steel.  Then place a large order with mcmaster-carr and assemble kits.. I'll buy one  ;)

Title: Re: Needle clip lost.
Post by srinath on 06/25/09 at 19:27:52

Send me $5 and I'll find it and mail ya in a little envelope taped to the envelope ... I'll mail ya 2 if you like, in case you had a 2 cyl ... If its same as any other suzuki, even easier, I'll yank some out of my other carbs - I'll check if its the same and do it by this weekend.
Cool.
Srinath.

Title: Re: Needle clip lost.
Post by odvelasc on 06/27/09 at 17:58:07

Do you have paypal? My carb is a vm38mm roundslide. So far my staple is holding up for about 150km. I should replace the clip before my trip to vermont in August though lol. Let me Srinath

cool
odvelasc

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.