SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> a little paint work! /cgi-bin/YaBB.pl?num=1245892832 Message started by Rocco on 06/24/09 at 18:20:32 |
Title: a little paint work! Post by Rocco on 06/24/09 at 18:20:32 here's the front fender and side panels painted, i got the header wrap and i'm goin to put a logo on the battery box. then i'm gonna do something different with the tank...gotta have a little suspense. what do u guys think? not bad for first time, 2 o clock in the morning, in the backyard! lol http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs117.snc1/5173_1017271371929_1829467793_38128_2735453_n.jpg http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs097.snc1/5173_1017271451931_1829467793_38130_7712362_n.jpg http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs097.snc1/5173_1017271331928_1829467793_38127_4371709_n.jpg http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs097.snc1/5173_1017271491932_1829467793_38131_5381950_n.jpg |
Title: Re: a little paint work! Post by odvelasc on 06/24/09 at 18:41:58 Honestly, without clear coat that paint is gonna come off with any rain or debris hitting it. What sort of paint did you use? If you used high temp paint I hope that you at least cured the pieces in the oven with the correct method. Curing will help the paint to hold up. |
Title: Re: a little paint work! Post by Savage_Amusement on 06/24/09 at 20:10:13 Or it will make the paint bubble up as it did for me. I was not happy, I had to start over for the 3rd time on this god for saken tank. |
Title: Re: a little paint work! Post by kevinphan on 06/24/09 at 20:34:36 777C6E7D74796B7B180 wrote:
I painted my bobbed rear fender, scuffed it with 80 grit, then 220, then a Scotch red pad and wiped it down with some Total Prep. Layed about 3-5 layers of primer, 3-5 layers of flat black and it still holds it color only place where there isn't any paint is where the tire rubbed when I bottomed out. I repainted it again a day or 2 ago though so everything is dandy. Just don't spill any gas on it and your golden. Looking good though Rocco! |
Title: Re: a little paint work! Post by Rocco on 06/24/09 at 22:49:15 i used rustoleum flat protective enamel lol it was the best i could find @ walmart! and i don't mind having to touch it up, i'm goin for the ratty look. so no curing or anything, and i used 400 grit and just got it smooth then did one layer of black. it was black to begin with so i guess it didn't need much. and thanks kevin! you'll love the tank idea i have then, you're the only one who knows. i bought a kit from home depot that goes from coarse to fine grit and i think that should do the job. i have to take the tank off to do it though, so i might hold off on that so i can ride! i don't have any help for the header wrap til friday so i have to wait...kinda sux but what can u do! i think she's coming along nicely! |
Title: Re: a little paint work! Post by AngloSaxon on 06/25/09 at 11:30:29 Nice lookin' bike! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |