SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Carb screws
/cgi-bin/YaBB.pl?num=1244725705

Message started by DrunkenDwarf on 06/11/09 at 06:08:24

Title: Carb screws
Post by DrunkenDwarf on 06/11/09 at 06:08:24

What size are the screws on the top and bottom of the carb?

I think they are:
top: M5 10mm
bottom: M5 15mm

I forgot to bring them with me and want to pick up replacements on my way home.

-D. Dwarf

Title: Re: Carb screws
Post by dasch on 06/11/09 at 07:10:34

M5x10 and M5x15 it is

Title: Re: Carb screws
Post by Mr. Hyde on 06/11/09 at 08:42:19

Someone else posted quite a bit earlier that they were all 5M x .80 Pitch. The top ones are 8mm long and the bottom ones are 12mm long.

So who's right?

Title: Re: Carb screws
Post by DrunkenDwarf on 06/11/09 at 08:45:32

My local store sells them in increments of 5mm.

5M x .8 pitch is correct.
10mm and 15 mm will fit, I hope.

Thanks.

-D. Dwarf

Title: Re: Carb screws
Post by Phelonius on 06/11/09 at 09:17:39

Thats what grinders are for.

Phelonius

Title: Re: Carb screws
Post by dasch on 06/12/09 at 02:16:22

OEM are like 8 and 16 long, somebody else said. Regardless, 10 and 15 work just as good. No cutting needed. Pitch? Metric ISO standard "coarse" (sic!). You have to work really hard here to find an M5 in any other thread. hahaha.