SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Rear axle diameter? /cgi-bin/YaBB.pl?num=1244262627 Message started by High-Def on 06/05/09 at 21:30:27 |
Title: Rear axle diameter? Post by High-Def on 06/05/09 at 21:30:27 I'm ordering a coustom license plate holder. Anyone know what diameter the axle is on a 01 Savage? I did a search but came up empty handed. Thanks for your responses. :) |
Title: Re: Rear axle diameter? Post by BurnPgh on 06/05/09 at 22:48:56 17mm |
Title: Re: Rear axle diameter? Post by High-Def on 06/05/09 at 23:03:38 Thank you sir. |
Title: Re: Rear axle diameter? Post by PTRider on 06/06/09 at 06:34:41 6B5C5B47794E41290 wrote:
Isn't that the wrench size? High-Def, measure the part of the axle that sticks through the nut on the left side. |
Title: Re: Rear axle diameter? Post by verslagen1 on 06/06/09 at 07:35:46 Nope the nut's 24mm, 17mm on the other side. I'm not anywhere near a loose axle can't say for sure. I was going to say 17 is one of the axles. |
Title: Re: Rear axle diameter? Post by High-Def on 06/06/09 at 08:36:09 445740415E5355575C03320 wrote:
Confirmed. But just because the "bolt side" or left side is 17mm does that mean the axle is 17mm all the way through? The "nut side" or right side IS a 24mm as verslagen1 stated above. :-? I don't have a torque wrench handy or I would just pull it off myself. |
Title: Re: Rear axle diameter? Post by smokin_blue on 06/06/09 at 09:30:03 a '97 is 17mm just like all the GT's and GS's since about 1972. S40's should be the same. Suzuki loved standards for so many years.....(then HP and technology matured) ;) |
Title: Re: Rear axle diameter? Post by dasch on 06/06/09 at 10:05:11 17mm all the way through |
Title: Re: Rear axle diameter? Post by diamond jim on 06/06/09 at 10:13:38 I have bought the common ones on ebay. Sometimes I had to make the hole just a smidge larger. Not much more than enough to remove the layer of paint. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |