SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> License plate mount /cgi-bin/YaBB.pl?num=1244092276 Message started by verslagen1 on 06/03/09 at 22:11:16 |
Title: License plate mount Post by verslagen1 on 06/03/09 at 22:11:16 Haven't been able to find a license plate mount that I wanted, so I made my own. Bought a piece of .093" thick stainless. Whipped out my trusty HF abrasive cut off air tool and cut it up to fit. Bashed it into shape with a big hammer. Drill holes to match and .... http://verslagen.savageriders.com/images/DSCN0514-small.jpg |
Title: Re: License plate mount Post by kevinphan on 06/03/09 at 22:23:08 It looks badass, kudos! |
Title: Re: License plate mount Post by John_D on 06/04/09 at 02:16:33 Looks sweet, and by supporting the full body of the plate, you shouldn't have the problem of vibration causing cracks in the plate, eventually leading to the plate becoming airborn! :o |
Title: Re: License plate mount Post by verslagen1 on 06/04/09 at 08:18:06 the plate from the PO had both upper tabs torn off. As you might notice there are no holes in the upper corners. Waiting for the new plate ;D |
Title: Re: License plate mount Post by Duane on 06/04/09 at 08:24:57 Looks great |
Title: Re: License plate mount Post by BouleTard on 06/04/09 at 09:16:42 Good job bending it out far enough to not get sucked back up under the fender.. learned that one the hard way.. :-/ |
Title: Re: License plate mount Post by diamond jim on 06/04/09 at 12:16:05 I did it that way too. http://i255.photobucket.com/albums/hh128/russ_diamond_jim/rearlights.jpg Problem I had was that I used the plastic screws with the fancy chrome covers. Came out one day and the whole tag and frame were gone. Doubt it was stolen. The frame was fairly heavy. I bet I lost it going across some RR tracks on the way to work. So when I got home I slapped on another motorcycle tag that I had laying around that wasn't expired yet and rode like that for a while. And I used real bolts and nuts. Bling breaks. |
Title: Re: License plate mount Post by Yonuh Adisi on 06/04/09 at 18:57:46 I saw this on a band new Harley at the stealership the other day and am thinking about getting one or making one for the FireLizard. It is a side mounted plate mount but it swings back. Any thoughts? http://pictures.topspeed.com/IMG/crop/200701/2007-harley-davidson-xl-1-6_800x0w.jpg |
Title: Re: License plate mount Post by verslagen1 on 06/04/09 at 22:55:38 Certainly looks built for a HD. Must mount to the fender rail. |
Title: Re: License plate mount Post by JohnBoy on 06/05/09 at 09:52:09 "...It is a side mounted plate mount but it swings back. Any thoughts? " It could "accidentally" swing back enough to keep the Photo Enforcement cameras here in Phoenix from seeing it! |
Title: Re: License plate mount Post by skatnbnc on 06/05/09 at 13:47:47 I like the swing plate. But it surely would be a reason for the cops to pull us over cause they cant see it... |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |