SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Exhaust Question /cgi-bin/YaBB.pl?num=1242407569 Message started by Fubar on 05/15/09 at 10:12:49 |
Title: Exhaust Question Post by Fubar on 05/15/09 at 10:12:49 Hey everyone, I have read several posts about the HD muffler conversion and one of them mentioned a 6-7 inch extension with a 10 degree bend. My question is what size pipe would you need to fit over the head pipe and the HD muffler? Thanks ;D |
Title: Re: Exhaust Question Post by diamond jim on 05/15/09 at 10:41:15 IIRC, 1 3/4" pipe. |
Title: Re: Exhaust Question Post by Fubar on 05/15/09 at 11:02:25 What does the IIRC stand for? I realize it may be a stupid question. |
Title: Re: Exhaust Question Post by diamond jim on 05/15/09 at 11:23:39 If I recall/remember correctly. |
Title: Re: Exhaust Question Post by Fubar on 05/15/09 at 11:27:10 Gotcha Thanks ::) |
Title: Re: Exhaust Question Post by Duane on 05/15/09 at 12:39:14 I'd really like to do the sporty conversion but I have a friend who works a a HD dealer and says he has guy bring back used ones all the time saying they don't work with the savage? |
Title: Re: Exhaust Question Post by odvelasc on 05/15/09 at 18:32:23 4574606F64010 wrote:
yes they do. You just have to shim the header with something in order for the muffler to fit snuggly and then clamp down tight. I used versachem hi-temp steel to shim but now after a year, that is breaking off from all the vibrations. Some have used pop cans and aluminum tape. In fact inside my old stock muffler I noticed some sort of aluminum wrapping used to shim the muffler. |
Title: Re: Exhaust Question Post by thumperclone on 05/15/09 at 19:00:06 78495D52593C0 wrote:
maybe the ones with the cross over nipple?? |
Title: Re: Exhaust Question Post by marshall13 on 05/15/09 at 19:23:23 2539243C213423323D3E3F34510 wrote:
maybe the ones with the cross over nipple?? [/quote] man that sounds painful... rofl |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |