SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> bypassing clutch interlock /cgi-bin/YaBB.pl?num=1242065262 Message started by Bobbert on 05/11/09 at 11:07:41 |
Title: bypassing clutch interlock Post by Bobbert on 05/11/09 at 11:07:41 I'm cleaning up the wiring on my bike and I moved the left control down to space between the risers. As it is now, I need to manually press the clutch interlock switch with my left hand as I start. If I just splice together the wires going into the connector for the switch, will there be any sort of power draw on the bike when it's off? Im assuming not but I want to be sure. |
Title: Re: bypassing clutch interlock Post by BillTheRat on 05/11/09 at 12:10:22 There shouldn't be an issue. The Y/G wire is only energized when you hit the starter button. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |