SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Handle bar length
/cgi-bin/YaBB.pl?num=1241381907

Message started by Phelonius on 05/03/09 at 13:18:27

Title: Handle bar length
Post by Phelonius on 05/03/09 at 13:18:27

I like the shape of the handlebars that I put on the bike 2 years ago but would like just a bit longer length. (wouldn't we all)
My solution was to get on the lathe and turn a couple of 3.5 inch slugs of steel so that two inches of it fit tightly into the inside of the bars, and the outer end was bores about 3/8 inch deep at the same diameter to accept the chrome plastic end cap. The outer inch or so was turned to match the outside of the bars.
I could have just JB welded the slugs into place and been done with it, but why di it the easy way when I can make it complicated? I bored the center to take a 5/16ths thread at the inner end, the balony sliced it off. Then bored the outer end one size bigger than 5/16ths and recessed a hole for the head of an allen screw.
Now with the slug inside the bar, the allen screw is tightened and the baloney sliced taper tightens inside the bar so that it cannot come back out without loosening the screw. Then the chrome cap is pressed back on and the grips moved to match. Ditto the controls.
End result is two more inches of leverage for sidecar steering and as a side benifit, my mirrors are now one inch further out on each side for a bigger view behind me. Win Win situation.
I would show photos but they are already mounted and unless I make another pair, they are not visable.
BTW they work well as bar end weights to smooth out handlebar vibes.

Phelonius

Title: Re: Handle bar length
Post by Max_Morley on 05/03/09 at 14:12:50

My Savage/Cozy rig has what some would call beach bars on it. They are wider and flatter than the buckhorns that are stock. I really like them except I catch more wind with the rather flat HD style shield rather than the fairing on the solo bike. I think they are 35" or so across the ends. Max

Title: Re: Handle bar length
Post by Phelonius on 05/04/09 at 09:48:24

I remember those beach bars from when Dr. Jim had it.
They are wider than even I like. I haven't measured, but I think mine with extensions are about 32".

Phelonius

Title: Re: Handle bar length
Post by klx650sm2002 on 05/05/09 at 03:44:35

The bars I have are 34.5" of straight bar on 3" risers.
Clive :)

Title: Re: Handle bar length
Post by Flemming from Denmark on 05/05/09 at 13:50:19

Mine is a 90cm (aprox 36") on stock risers and fit's my body perfect (short legs and long arms :) ) It looked very wide in the shop, but when mounted I think it looks good
http://peecee.dk/uploads/052009/18072008169_big_thumb.jpg

Title: Re: Handle bar length
Post by Phelonius on 05/05/09 at 14:50:46

As I said, I would try to post photos of the devices.
When assembled and inserted into the bar, the allen is tightened to lock it in place. The aluminum end cap and the device are mated with a 1/8th inch roll pin so that the end cap does not come off the way the standard plastic one did.
The standard ones are designed for one use only, and never are secure on re-use. Ask me how I found out.
http://p1.bikepics.com/pics/2009/05/05/bikepics-1658502-800.jpg
http://p1.bikepics.com/pics/2009/05/05/bikepics-1658504-800.jpg

Title: Re: Handle bar length
Post by diamond jim on 05/05/09 at 15:00:18

Wow, Flemming, looks like you've got a piece of hang glider frame for a handlebar. Exactly how long are your arms?

BTW, did you shorten your upper belt guard? Bike looks nice.

Title: Re: Handle bar length
Post by prsavage on 05/05/09 at 15:22:43

You do some fine machining I must say. I like your front fender too. I am guessing I am not alone in thinking your whole bike needs to be shown.

Title: Re: Handle bar length
Post by Phelonius on 05/05/09 at 16:54:32

06040E0707610 wrote:

You do some fine machining I must say. I like your front fender too. I am guessing I am not alone in thinking your whole bike needs to be shown.

It's raining like a sumbich right now. I will take a fresh photo when the sun shines and the bike is clean.

Phelonius

Title: Re: Handle bar length
Post by Flemming from Denmark on 05/06/09 at 10:23:12

;D My arm is 73cm, rather normal I guess (mesured my jacket) And I know the handlebar looks wide, but sitting on the bike it don't feels so wide. The stock buckhorn mounted when I bought it was not good to my bag and shoulders. My upper belt guard? - Hmmmm - Never noticed that before now ( my collection of savage pic's only contains about 2000 pic's :) ) But you're right - it must have been shortened in some way, but it's not me who had done it. The edge is very nice where it's cut, no rust or sharp edges. Maybe it have been chromed after the cut.