SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Handle Bars /cgi-bin/YaBB.pl?num=1241107400 Message started by genejohnson on 04/30/09 at 09:03:20 |
Title: Handle Bars Post by genejohnson on 04/30/09 at 09:03:20 Am I right in assuming Savage bars are 1" diameter? The PO installed a drag bar without risers and it hits the tank. I need to get something else that will clear the tank. Without taking them off, It's hard to tell the correct diameter and I don't have any way of measuring it.. Gene |
Title: Re: Handle Bars Post by bluesavage218 on 04/30/09 at 09:07:10 Yes savage bars ar 1". |
Title: Re: Handle Bars Post by verslagen1 on 04/30/09 at 09:13:30 Ø1" and about 6" of rise will do ya. Or do you want stock buckhorns? I'm sure someone got one, if not I do. |
Title: Re: Handle Bars Post by bluesavage218 on 04/30/09 at 09:14:35 I've got a set of buckhorns as well. |
Title: Re: Handle Bars Post by srinath on 04/30/09 at 10:11:55 I have a set of 6 inch risers I made. Pics are here ... http://picasaweb.google.com/srinath.the.man/RiserPics# 60 shipped and there is a couple people fitting em as we speak. They can chime in. But it worked like a charm on mine. :) Cool. Srinath. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |