SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Belt adjustment /cgi-bin/YaBB.pl?num=1240870224 Message started by PTRider on 04/27/09 at 15:10:24 |
Title: Belt adjustment Post by PTRider on 04/27/09 at 15:10:24 My Savage didn't have the belt tension gauge in the tool kit. Can anyone provide the way to measure the correct tension of the drive belt without the special gizmo? Thanks |
Title: Re: Belt adjustment Post by Reelthing on 04/27/09 at 16:09:04 90 degree twist method is better anyway the tool tends to get it too tight |
Title: Re: Belt adjustment Post by craigq on 04/27/09 at 17:16:55 Hmmm, I think my belt may be a bit too tight... the one on the bike... the drive belt on the bike... :D |
Title: Re: Belt adjustment Post by PTRider on 04/27/09 at 17:45:51 07303039213D3C3B32550 wrote:
So tighten just enough so it's possible to put a 90° twist by hand in the bottom of the belt? |
Title: Re: Belt adjustment Post by Reelthing on 04/27/09 at 20:48:47 that's it - say about halfway between the front and rear pulleys |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |