SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> rear brake light wiring (98) /cgi-bin/YaBB.pl?num=1240183043 Message started by matt_savage on 04/19/09 at 16:17:23 |
Title: rear brake light wiring (98) Post by matt_savage on 04/19/09 at 16:17:23 On a 1998 Savage, can anyone confirm the 3 wires going to the rear brake light? From my best guessing by looking at the Clymer manual, I've got: brown wire = postive black w/ white stripe = negative white w/ black stripe = ground I'm changing my brake light to a standard 2 wire light mounted on a side mount and would like to take the guessing out of hooking up wires and testing. TIA -Matt |
Title: Re: rear brake light wiring (98) Post by verslagen1 on 04/19/09 at 18:03:14 This is how I've got mine wired brown wire = postive black w/ white stripe = ground optional white w/ black stripe = negative |
Title: Re: rear brake light wiring (98) Post by matt_savage on 04/19/09 at 18:06:40 ok, after looking at it more, looks like I did trace them wrong. I'll experiment with the black w/ white stripe wire and white w/ black stripe wire as negative and ground. For sure the brown is positve. Thanks V -Matt |
Title: Re: rear brake light wiring (98) Post by T Mack 1 on 04/19/09 at 18:48:26 Black with white trace is ground. NOTE: that's pretty much standard throughout the bike. Brown is running lights, but they are always on , so yes, positive. White with black trace is brake light (switched). |
Title: Re: rear brake light wiring (98) Post by matt_savage on 04/20/09 at 06:26:38 Cool, thanks for verifying 2x T Mack. I'll get on it hopefully tonight after the rain stops! -Matt |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |