SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> New rear fender?
/cgi-bin/YaBB.pl?num=1238791556

Message started by matt_savage on 04/03/09 at 13:45:56

Title: New rear fender?
Post by matt_savage on 04/03/09 at 13:45:56

Does anyone know where Demin got the rear fender he's using for his purple bobber and what kind of fender it is (measurements)? I tried PM'ing him but I guess he hasnt checked the site in a while. I'm in the middle of doing some upgrades/bobbing/chopping mine and love the look of the fender he used on his purple bobber. Thanks all!

-Matt

Title: Re: New rear fender?
Post by sakara on 04/03/09 at 13:52:49

I've heard of some people getting trailer fenders from Harbor Freight and the likes, but not sure exactly on Demin's.

Title: Re: New rear fender?
Post by rigidchop on 04/03/09 at 15:46:49

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1214362896

Title: Re: New rear fender?
Post by Savage Eddie on 04/03/09 at 18:59:30

i found mine on ebay, just type in 6 inch rear fender. how long of a fender are you looking for? mine was a full length trailer fender and i cut it in half so i have a un-used half.

http://i170.photobucket.com/albums/u248/socomiou1/PICT0240.jpghttp://i170.photobucket.com/albums/u248/socomiou1/PICT0234.jpg

Title: Re: New rear fender?
Post by matt_savage on 04/03/09 at 19:15:23

thanks rigid, just what I was looking for!

Title: Re: New rear fender?
Post by diamond jim on 04/03/09 at 19:25:16

Eddie, does that rear fender bounce? Is there any support on the back end or is it one of those thick, sturdy fenders and doesn't need rear support?

Title: Re: New rear fender?
Post by Savage Eddie on 04/03/09 at 19:29:27

its just laying on the tire, i was just taking pics as new stuff was delivered. i started mounting the fender (shortened fender) a couple days ago. there will be no bouncing when im done :)

it is a thick sturdy fender though. for the price i was impressed....

Title: Re: New rear fender?
Post by lokjaw777 on 04/04/09 at 04:38:42

eddie fender looks great ....it's about the look i'm trying to get ....let me ask about the tail light ....the stock one i took off has 3 wires .an all the ones i look at that are all 3 lights like yours have 2 wires .......a why and how would help before i start spending more $buks$.....thanks for any and all help............

Title: Re: New rear fender?
Post by matt_savage on 04/04/09 at 07:27:38

One of the three wires going to the stock light is a ground. You have to figure out which one is the ground in the stock loom and route that one to one of the bolts on the back of the new light. Pretty sure this is how I'm gonna have to do mine when it gets here. Someone else will chime in too.

Title: Re: New rear fender?
Post by Savage Eddie on 04/04/09 at 07:40:53

Exactly! i tested mine on a loose car battery and the case of the two wire lights were a ground.