SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Help needed!
/cgi-bin/YaBB.pl?num=1236970458

Message started by Cipolino on 03/13/09 at 11:54:18

Title: Help needed!
Post by Cipolino on 03/13/09 at 11:54:18

I whant to buy an performance exhaust and cone air filter .... What specs should i look for? like diameters, OD, ID ...
I've been to a shop and asked a guy what he has for Suzuki Savage ... and he said he has nothing 4 my bike .... the guy sells Harley stuff mainly. the thing is that i saw some stuff i could use on my bike, like tahometer, led blinker, sadlebags, toolrollbag, and i felt like the guy it's just rude ... maybe he doesn't like the job ... or my face ...
so next time i go to a shop i wanna be prepared

Title: Re: Help needed!
Post by diamond jim on 03/13/09 at 16:56:18

If he has harley prices then just look and don't buy. We'll help you find a good deal. For the pod filter you want one with a opening that measures 57mm (2 1/4"). For exhaust- generally 1.75" to 2"easy can be adapted fairly easily to the LS650. HD dyna and sportster mufflers are almost a direct bolt on. There are some certain HD mufflers you want over other ones. I don't remember which years to avoid due to the crossover pipe but I'm sure someone will be along shortly to fill in that info.

Title: Re: Help needed!
Post by Mr. Hyde on 03/14/09 at 06:21:49

Some other member posted this just awhile ago:

Quote:

If you want a Dyna canister, you will want to ask for one that will fit a 2004 or earlier with NO crossover. Just go up to the parts counter and ask them if they have any take-offs. Bolts right on, but, you WILL need to re-jet

Title: Re: Help needed!
Post by Cipolino on 03/14/09 at 09:38:11

i would not buy anything from the harley guy .... coz he was an a$$whole, i am looking for some exhaust so i would not have to rejet the carb ... my knowlege is prety poor ...
i would like to put that cheap home made raask like exhaust .... but i am sure i will have to rejet.
i found some stuff on ebay but most of them are in US and i am in Cyprus, and it will add the posting, and some tax on top ...
i found some nice screaming eagle lookalike exhaust, don't know for sure but i think somebody here makes them, the price is ok ... first time i asked to a shop and the guy said 130 euro, mounting not included, he said it will be around 40 euro extra ... i said i will think about it and left ... i felt like the guy is ripping me off ....
so i went to a garage where they mount exhaust for the cars ... i was looking if the guy can make me a raask exhaust ... and i found the same exhaust i saw in the shop before ... at 70 euro with the mounting ...
so it is a 100 euro diference ...
this exhaust seems to be buffled, so maybe i will not need to rejet ...

Title: Re: Help needed!
Post by BurnPgh on 03/14/09 at 15:03:51

You'll probably need to rejet no matter what you switch to. With the dyna exhaust maybe not (so im told). I was going to go the dyna route but got a brand new screaming eagle for $25 off ebay. Too good a deal to pass up IMO so i went ahead and got lancer's jet kit too. I'll take care of that once I get my sputtering issue taken care of.