SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Kuryakyn Foot Pegs
/cgi-bin/YaBB.pl?num=1236803757

Message started by gerald.hughes on 03/11/09 at 13:35:57

Title: Kuryakyn Foot Pegs
Post by gerald.hughes on 03/11/09 at 13:35:57

I have been thinking about replacing my stock rider pegs with a pair of Kuryakyn Dually ISO pegs. It would be a compromise between pegs and floorboards. I emailed Kuryakyn, asking which adapter peg I should use. They wrote back and said that they did not make an adapter for the Savage/LS650/S40.

I know from reading the posts, that some of the members of this site have put Kuryakyn grips on their bikes. My question is, has anyone put Kuryakyn rider pegs on their bike? if so, which adaptor did you use, or what modificarions did you have to make?

Thanks

Title: Re: Kuryakyn Foot Pegs
Post by blacksheep23 on 03/11/09 at 17:24:22

http://www.cruisercustomizing.com/detail.cfm?model_ID=103&Category_ID=54&manufacturer_ID=16&product_ID=8315&related=short

U need to drill it a lil bit to make it fix with the stock bolts that fit thru the pegs.It shldn't take less than 30 mins.

Gd luck!

Title: Re: Kuryakyn Foot Pegs
Post by Savage40 on 03/12/09 at 03:28:57

4C424F4D455D464B4B5E1C1D2E0 wrote:

Good info to have, thanks! Eventually I'd like to try some out, like the Switchblades or something. :-/ Look like they might be comfy.

Title: Re: Kuryakyn Foot Pegs
Post by gerald.hughes on 03/12/09 at 21:35:40

Blacksheep23,

Thanks for the link. I ordered the adaptors and the pair of Dually ISO pegs for less than the dealer wanted to charge me for a stock left peg.

Title: Re: Kuryakyn Foot Pegs
Post by bugsville on 03/13/09 at 04:02:56

Those are the adapters I used as well, I had to open the hole up a bit as well as shave a little off the top for the left side peg. I used a cone and cylinder shaped grinding stone and my dremel tool.